S-Curve a clean bottom..

[3kidsnotime]

The chassis is about done, I need to finish the rear brake lines fuel lines and exhaust up so I decided to strip the bottom of the body to paint it, I like a finished car top and bottom, so off with that 70's inch thick undercoat and WOW what a clean old car, I knew it was clean but not this clean, so about 40 bucks in chemicals and the steam cleaner we have a nice clean paint surface to work with, so far about 9400.00 in the project and 90 percent of the stuff to finish it.

[LateNight72]

Nice. Wish my A-Body was that clean underneath.

What type of "chemicals" were used?

-Todd

[MarkM66]

Originally Posted by LateNight72

Nice. Wish my A-Body was that clean underneath.

What type of "chemicals" were used?

-Todd

Yeah, and what type of "steam cleaner?"

[3kidsnotime]

The steam cleaner is a older Aaladin, I ran it at 225* and took most the grime and undercoat off, then used brake cleaner to soften the rest of the undercoating, another pass with the steam cleaner and a final bath with aircraft stripper. worked quite nice and was not alot of money.

[oldzzy]

Man does that thing look solid! Nice work.

[T Bell]

Super clean!!!!!!!! Did the factory not paint the undersides? I sure doesn't look like it.