Taking the mini tub plunge

[Steve Firebird]

Originally Posted by Moose

i've talked to air ride and chris alston and both told me that they never have heard of this problem..

Now with my car, it has the driveshaft to far in, so either I shorten the driveshaft by another 1", or make adjustable lower control arms.

I'm going to make the lower control arms adjustable as well.. I can get the pinion angle spot on at that point.

Not trying to scare you steve, I hope yours comes out 10 times better then mine.. Probally will since you have a professional shop doing awesome work..

Also, any chance you can find out how much the rear was narrowed, and back spacing on the rear rims when you get a chance.. I want to mini tub mine as well, and that sure would help me.

Sure thing. The BS on the rims are 5.5 and I the rear end is getting narrowed 2" on each side if I remember right. I can recheck with Kuert when he gets back from the Power Tour to make sure. I emailed Kurt about the wheels centering in the well and he is going to keep and eye on it. One thing I asked is weather or not they are dead centered in the well from the factory. I don't think thery were.