These pics were taken today. We maight be out the back tommrrow and start figuring how to do the exhaust tips. We have a few ideas. Chevy bow ties, or I was thinking some tips in the shape if the trucker girl mud flap decoration.We got the bumpers back from the chromer on monday all stripped down so we will do our mods to them and then decide how to do the rear valance. We got 3" exhaust over the axle at will get around the full width gas tank. I need to redo that upper shock mount on the G bar that just bugs the crap out of me. It is a total waste of space. With the ride height we have it set at the lower link level but only has about 2.5" of shock travel showing. So I would have to run a stiffer spring rate to keep it from bottoming out, so By moving the pickup point up it will allow the shock to be at it's design height at ride height, so it can ride nice and not bottom out.
Sorry rant over
Flash68 It is October, how is your camaro doing? I selled the deal on one for the shop today. I should have 3 camaro's in my shop between now and SEMA.
Rodger
|
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Threaded Mode