My Cuda Project Part II...now at Bruning Auto Design

[tjbruning]

Originally Posted by DOOM

TJ. Is your patch TIG or MIG
Mario

Originally Posted by 68protouring454

the only way to metal finish a but welded panel like bruning is tig, its looks like there using reg filler, but silicon bronze works very well and keeps the heat down when welding and metal finishing

Tig. Mig welding has its place (not trying to sound like a tig or bust snob), but not for light gauge sheet metal work.

Tim used silicon bronze filler on some of the thin areas around the quarter skin. The patch was fit and fusion tacked in place. Very little filler rod was needed. The upper section above that patch was also replaced right below the window area.