TVS2300 anyone??

[victionone]

Originally Posted by camcojb

Now the Ford mod motors are much wider (and deeper) blocks between the heads without a camshaft in the way, and apparently can get a more efficient intercooler core in them, as the air temps after the intercooler on my Lightning were much better than what they're seeing on these. You are correct, a better heat exchanger to lower water temps through the intercooler will help, but it's still going to be compromised by the size and efficiency of the intercooler core.

Jody

GM probably realized this and placed a bigger cooler on top of the blower on the LS9/A, while the Harrop/Maggie config uses the smaller cooler underneath the blower.

I talked to one engine shop who is seeing more power out of the Maggie setup over the LS9 and his reasoning is because it might be less restrictive.