prebuild before painting! Well, got the engine out and mated to the 4L60E and slide them under the car and wouldn't you know .... the tranny mount is still too far forward for the frame mounts. I will need to either: modify the cross brace to mate to the brackets on the frame, or cut the brackets off the frame and re-weld them farther forward! Hmmmm.
All dressed up and no where to go! Cross brace is too far forward .... GRRRRR! SHORT....by that far! Another view. Snails view @ 5" ride height, nothing below the crossmember ... yet!
Not much of an update, but my goal was met .... when it warms up to 50's get that dang tranny under the car! Now hopefully tomorrow I'll get the leaf spring brackets cut off the 12 bolt and prepare the weld on brackets and measure the pinion angle for one of many I'm sure!
Thanks for looking .... I've got homework to do now!
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
That's why we
Threaded Mode