PWM cooling fan(s) control using ECM

[will69camaro]

Originally Posted by samckitt

I can't say 100%, but I pulled mine off of early 2000 front wheel drive cars. I pulled a few for friends & they all worked. I bought the connector from EFI Connection & it was the same connector as what I found in the junkyard. I assumed/hoped that it was the same sensor. I think I paid $5 a piece for the connector pigtail, sensor, & segment of hose.



I haven't done it on my AC line yet, but buddy took one of these to AC shop & they removed the fitting from the tube & then braised to an elbow that then gets crimped onto a hose.

For what it's worth, a Vendor sells something that would make this slightly easier possibly.

http://www.restomodair.com/shopproducts/t-fitting/

I think that's the route I'll be going.