My '85 Mustang LX Notch Project

[JohnnyGMachine]

I thought I'd post some pics from the Mustang Camp here. I know there's a couple guys building some Fox Body cars on here so here's what I'm workin' on...

Most of my current and future mods are listed on my FQuick page. The basis for this car is that I want it to be able to do more than straight line performance. There's a lot of guys out there that build these mostly for the 1320. As much as I enjoy the straight line drag strip runs, I still wanna be able to take corners. I also wanna be able to drive it to work on a nice day.

Anyways, I just received delivery of my new AFR 165 competition heads and they are just beautiful. I would've went with 185s but the shortblock only has 15,000 miles and I think I can eventually acheive the 350-400 RWHP mark with a stock bottom end. On the 5.0s I know you have to notch the pistons if you wanna run the 185s. Next I am ordering the cam and a few other small items and I should have her runnin' by late winter.
The next goal is to get the Baer brakes kit and then the Maximum motorsports coil over setup front and rear. For now the SN95 front and rear disc brake conversion will handle the stopping needs.

http://www.fquick.com/garages/viewvehicle.php?id=733

J