69 Camaro seat install help Please!

[TChance69]

You guys rock! Thanks I will try it.

[130fe]

Be sure and use grade 8 hardware also.

[Denvervet]

When I did mine I used 1 & 1/2 angle iron (1/8") for the rear feet. Nice and sturdy and easy to weld to original brackets. I just cut the rear feet off (they are off-set the wrong direction) and placed a block of wood under brackets to then mock up about 2" long angle irons and tacked in place before pulling off to finish welds.

[TChance69]

Thanks sound like all are good ideas!