69 Camaro seat install help Please! - Lateral-g Forums

**130fe** · #1 02-19-2010, 02:30 PM

Front holes line up. For the rears you can cut and reposition them to fit or use some 1/4 plate and make adapter plates (for new and old holes). They are very comfortable.

RECOVERY ROOM · #2 02-19-2010, 04:24 PM

Quote:

Originally Posted by 130fe

Front holes line up. For the rears you can cut and reposition them to fit or use some 1/4 plate and make adapter plates (for new and old holes). They are very comfortable.

Thats a good answer

TChance69 · #3 02-19-2010, 06:10 PM

You guys rock! Thanks I will try it.

**130fe** · #4 02-19-2010, 08:34 PM

Be sure and use grade 8 hardware also.

Denvervet · #5 02-20-2010, 09:18 PM

When I did mine I used 1 & 1/2 angle iron (1/8") for the rear feet. Nice and sturdy and easy to weld to original brackets. I just cut the rear feet off (they are off-set the wrong direction) and placed a block of wood under brackets to then mock up about 2" long angle irons and tacked in place before pulling off to finish welds.

TChance69 · #6 02-21-2010, 06:44 PM

Thanks sound like all are good ideas!