12Bolt Housing Ends, with C Clip eliminator. What brakes??

[Apogee]

Originally Posted by deuce_454

i had 9 inch ford housing ends installed... im prety sure core3 has brakes galore for GM ends.. as does baer

We have kits for the Moser/Strange/etc GM/Ford housing ends with the GM pattern and 80mm Ford bearings, however not the bolt-on C-clip eliminator kits since they tend to need to be mounted in the same position as our brake components.

Just a thought, but if selling the bolt-on C-clip eliminators and axles is an option, having new housing ends welded onto your housing along with new axles would open up a whole range of brake kits for you. We typically suggest the new-style Ford 9" housing ends as a good standard, however can accommodate other positively retained applications as well.

Tobin
KORE3

[ProdigyCustoms]

Originally Posted by Apogee

Just a thought, but if selling the bolt-on C-clip eliminators and axles is an option, having new housing ends welded onto your housing along with new axles would open up a whole range of brake kits for you. We typically suggest the new-style Ford 9" housing ends as a good standard, however can accommodate other positively retained applications as well.

Tobin
KORE3

Great information. Also I might add how badly bolt on C Clip Eliminators leak and how much problems that can cause.

I would put Big Ford Torino End on it if it has bolt on Eliminators.

[NEW]

Originally Posted by Apogee

We have kits for the Moser/Strange/etc GM/Ford housing ends with the GM pattern and 80mm Ford bearings, however not the bolt-on C-clip eliminator kits since they tend to need to be mounted in the same position as our brake components.

Just a thought, but if selling the bolt-on C-clip eliminators and axles is an option, having new housing ends welded onto your housing along with new axles would open up a whole range of brake kits for you. We typically suggest the new-style Ford 9" housing ends as a good standard, however can accommodate other positively retained applications as well.

Tobin
KORE3

That is exactly what i am starting to think i'll need to do.. Say the wilwood kits that are out there, that would go directly on, they are not your typical pro touring parts, more pro street stuff,, 1/4..

Nils

[ProdigyCustoms]

There are tons of Pro Touring brakes from every manufacturer that will fit Torino ends.

[NEW]

Originally Posted by ProdigyCustoms

There are tons of Pro Touring brakes from every manufacturer that will fit Torino ends.

My issue is that i have the small gm style ends,,,, I need to change my ends..

[ProdigyCustoms]

Exactly what I was saying, put on Torino ends and the world is yours for brakes

[NEW]

Originally Posted by ProdigyCustoms

Exactly what I was saying, put on Torino ends and the world is yours for brakes

i misunderstood what you meant.

Nils