Lokar 69 Camaro by Goolsby Customs

[GoolsbyCustoms]

Originally Posted by DOOM

Josh you guys keep knocking it out of the park!! I'm going to start a new tag on my signiture of stolin ideas I'm going to have to add you now...

Thanks a lot and we would be honored to be on that list,

Originally Posted by Crystalss

Amazing work! Could you tell me what size lip the wheels have in front and rear. I like the look of a decent lip in front when the rear is so deep. "that sounds funny". The trunk release is an awesome idea. Can't wait for more updates.

Herman

The wheels that are on there in those shots are mockup wheels, but are close to the offsets that we will be running in the end, front is 9" wide with a 5.5 BS and the rear is a 12 with a 5.2 BSthis gives you roughly 5" of lip in the back and 2.5" to 3" lip in the front , final BS on the front will come in around a 1/2" to give more tire clearance when turning, hope that helped a litttle

-Josh

[Crystalss]

Originally Posted by GoolsbyCustoms

The wheels that are on there in those shots are mockup wheels, but are close to the offsets that we will be running in the end, front is 9" wide with a 5.5 BS and the rear is a 12 with a 5.2 BSthis gives you roughly 5" of lip in the back and 2.5" to 3" lip in the front , final BS on the front will come in around a 1/2" to give more tire clearance when turning, hope that helped a litttle

-Josh

Yes, that helps, and Ill say it again... Awesome Build!

Herman

[BuiltByBrooks]

Very nice work!!

[GoolsbyCustoms]

Well we have been tooling away on the Lokar camaro and have been slowing down on the updates prior to Sema , but heres a few more to let everyone know what we have been up to , as well as give a sneek peak of a few new products you might see debuted in addition to the car! , There is also a few shots in there from a shoot our good buddy John Jackson from NotStock Photography did for us , some really cool stuff, Enjoy .. there might not be many more until Sema

[DOOM]

Josh... WOW bro it just keeps getting better you guys are true masters!!

[sokoloka]

Originally Posted by GoolsbyCustoms

Looks absolutely AMAZING!!
What wheels are those?

[GoolsbyCustoms]

Originally Posted by DOOM

Josh... WOW bro it just keeps getting better you guys are true masters!!

Thanks man , we appreciate, but someone can be a "master" at a multitude of things ...some not good

Eric, The wheels are from Nutek from their concave series , real nice stuff and great to deal with they have built us several sets lately

[GoolsbyCustoms]

[gearheads78]

That is so sinister looking. Great metal work.

[GoolsbyCustoms]

Originally Posted by 67ragtp

Killer metal work, Please tell us who's wheels they are, perhaps your design?

Thanks
The wheels are the 710 from Nutek http://www.nutekwheels.com/c-6-concave-series.aspx they have a platinum center with brushed nickel hoops that we had Advanced Plating do, to match the other bits on the car we are having done as well. We are a dealer for Nutek so if anyone is ever interested just give us a call.

Beautiful car!

Rich

Originally Posted by waynieZ

Awesome job!

Originally Posted by redfire69

Great design and awesome metal work!

Originally Posted by gearheads78

That is so sinister looking. Great metal work.

Thanks again for all the kind words on the design as well as the metal work , Lokar has been beyond amazing to work for and its exciting to see it getting a good reception for them. The compliments on the metal work is extremely gratifying to the guys in the shop who are putting their blood,sweat and tears into these projects , so on their behalf I thank all of you guys for the compliments. There is amazing talent all over this board and for someone to take the time to post something means a lot to some small timers from Alabama.