Camaro XV

[NvrDun71]

Hey Mark was curious which AC bracket you use to mount the V/A compressor and still work with the GM ls9 front drive?

[Stielow]

Originally Posted by NvrDun71

Hey Mark was curious which AC bracket you use to mount the V/A compressor and still work with the GM ls9 front drive?

The Concept One LS9 set up works great!

http://www.lsxtv.com/news/ls9-powere...ley-treatment/

Mark

[NvrDun71]

Originally Posted by Stielow

The Concept One LS9 set up works great!

http://www.lsxtv.com/news/ls9-powere...ley-treatment/

Mark

Thank you Sir, Looks like a nice setup! Appreciate you pushing the envelope and recruiting companies like this to step up on new products!

[sixnina]

Mark,
Are you going to continue to run Abs on this one too?
Shane

[Stielow]

Originally Posted by sixnina

Mark,
Are you going to continue to run Abs on this one too?
Shane

Yes I mounded the ABS module today so I plan on using it.

[tubbed69]

Hello Mark,great work as always,I like the idea of moving the fuse box and harness coming thru the firewall and curios where your mounting it because I was wanting to do that to mine,thanks.

[next69]

Please post a finished image of the subframe with the compressor and engine mount in place. Keep up the good work.

[Sparks67]

Originally Posted by tubbed69

Hello Mark,great work as always,I like the idea of moving the fuse box and harness coming thru the firewall and curios where your mounting it because I was wanting to do that to mine,thanks.

I am not sure on Mark's plans to relocate the fuse box and harness, but back in 1987. My fuse box/bulkhead was corroded, but there was no rewiring kits or factory fuse boxes available. So, Ron Francis had developed a street Rod fuse box. I rewired my car and relocated the fuse box to the glove box.

Now you have plenty of companies that sell kits, so you can relocate the fuse box to other locations on the car. I believe Twister had it relocated in the trunk, with AAW kit. I chose the ISIS system, which gives me more flexibility on the wiring of my car. Your fuse box location should be based on your car and it should be easily accessible to you.

Jeff

[RussMurco]

Originally Posted by Stielow

Yes I mounded the ABS module today so I plan on using it.

I can't wait to find out how you calibrated this set-up!

[Bowtieracing]

Originally Posted by Stielow

The Concept One LS9 set up works great!

http://www.lsxtv.com/news/ls9-powere...ley-treatment/

Mark

But are you going to use it ? I noticed you cut the frame allready and with concept one its not needed?