Dreamin Ta's

[WSSix]

I bet you'll beat me at getting the car back on the ground, Bob. Glad you're moving forward again.

[Panteracer]

Finished up my wiring... had to shorten the battery cables
They are 30 year old real braided copper double ott.. not sure
you can but this good stuff any more

Bob

[glassman]

Nice to see it coming together. You coming out to GG in March with this hopefully?

[Panteracer]

Glassman
Yes I finally got it running again
Ordered a new containment seat
today. Might do Crowslanding in early
March to try to dial things in

It will be good to see you again

Bob

[Panteracer]

Installing my new birthday present
I lowered the seating position along with
moving it back for better leg position

Bob

[Panteracer]

So I have been missing the old Muncie
2nd gear so finally pulled the tko 600
and ordered not a M-22 or 23 they are now
making a M-24. Better cooling and gear angles
with a bunch of other goodies including
Gearing with better ratios

Midwest Muncies. Can't wait to see it arrive

Bob

[andrewb70]

Originally Posted by Panteracer

So I have been missing the old Muncie
2nd gear so finally pulled the tko 600
and ordered not a M-22 or 23 they are now
making a M-24. Better cooling and gear angles
with a bunch of other goodies including
Gearing with better ratios

Midwest Muncies. Can't wait to see it arrive

Bob

Bob,

Any more info on this trans? Midwest doesn't have it on their website.

Andrew

[rustomatic]

Nice seat, Bob! What are you doing for a back brace? When it comes to a Kirkey, the back brace definitely seems to make the seat (that and the cover).

Your trunk space is very CP car now--mine looks pretty similar, with all the extra airflow and whatnot.

I'll have to make a point of getting down to a Crows Landing event this year, if only to watch. It's tough to give a day to an SCCA event where you only drive for like four minutes, but Crows Landing at least seems a bit more on par with the Marina course.

Originally Posted by Panteracer

Installing my new birthday present
I lowered the seating position along with
moving it back for better leg position

Bob

[Panteracer]

Seat brace is the one kirky sells for that seat
I did have to make a couple of shims so it would
bolt into the cross bar of of my 5 point setup.. it
was hitting in the middle of the bar so just a little
shimming out with some tube alum

Hope to get it up and running again soon then off
to Crows for a few events
I just need to stop changing things

Would love to see your Falcon/corvette creation

Bob