stock ls intake

[kennyd]

looking for a stock intake, fuel rails and throttle body for LS motor . i have a 5.3l i need to install in a rockcrawler but i need more hood clearance .
i plan to use the injectors sensors and wiring on the 5.3 . will it work ?

[Jr]

ls1tech.com would be the best place for your wiring question. If you are looking for a stock intake, I would go with a ls6 intake. The ls6 flow a little better than the stock ls1 intake.

conversions and hybrids forum
http://ls1tech.com/forums/forumdisplay.php?f=28

Hope this helps

David

[ironworks]

It might be worth cutting a whole in the hood, for the added low end torque a stock 5.3 manifold would provide.

[marolf101x]

I'm not sure about the 5.3 but the injectors may not fit the LS1 intake.

I did a 6.0L and the truck injectors would not physically fit the LS1 intake/fuel rails. You can get "take out" injectors off LS1's all day long on Ebay or the LS1 forums.

[MarkM66]

I've got an LS1 intake and tb, you can have it if you want it.

[Stang's Bane]

Originally Posted by MarkM66

I've got an LS1 intake and tb, you can have it if you want it.

That right there speaks to how good the LS1 intake is...