Twin Turbo 73 Mach 1 updates

[camcojb]

Originally Posted by TwinTurboMach1

Engine is a 408C 8.9:1 compression
Probe 16cc dished pistons
Scat 6" H beams
Scat 4" stoke forged crank

.524 lift cam (yes the girdles are overkill Im going to go to a rolelr when my budget allows)

2.19 1.71 Manley valves, ported 4v heads
Torker intake.

boost will be a very modest 3.6psi For right now, I dont feel like blowing another motor. Maybe next year ill make it back up to the 9psi My old 351 had.

any reason why you're that conservative on boost? I can understand not wanting to break it, but for an under 9:1 motor 3.6 psi is very low.

Jody

[96z28ss]

Originally Posted by camcojb

any reason why you're that conservative on boost? I can understand not wanting to break it, but for an under 9:1 motor 3.6 psi is very low.

Jody

i don't see any intercoolers

[TwinTurboMach1]

Most turbo guys who run carbs do NOT run intercoolers. The atomization of the fuel through the carb creates an intercooler effect much like Using meth injection. Most Carb guys on turbomustangs.com run without intercoolers. some as high as 30psi.