...

Go Back   Lateral-g Forums > Events > Track and Driving Events
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 08-07-2008, 10:57 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,319
Thanks: 7,098
Thanked 2,174 Times in 1,001 Posts
Default

Quote:
Originally Posted by lil427z View Post
jody how does the ac work. that will keep the wife happy.
rick k
my compressor clutch doesn't work, will have to get fixed later.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #2  
Old 08-08-2008, 06:33 PM
xplantdad xplantdad is offline
Senior Member
 
Join Date: Sep 2006
Location: Peoria. AZ (80 degree weather is here!)
Posts: 242
Thanks: 16
Thanked 12 Times in 3 Posts
Default

Ken Tibor (Kwhizz on this site as well as others) is up at Hot August Nights with Charley and Jody...and he posted the shots below on the Yenko site...here is a link to all of his pictures!

http://www.yenko.net/ubbthreads/show...0/fpart/1/vc/1

Ken rocks!








Last edited by xplantdad; 08-09-2008 at 06:51 AM.
Reply With Quote
  #3  
Old 08-08-2008, 06:34 PM
xplantdad xplantdad is offline
Senior Member
 
Join Date: Sep 2006
Location: Peoria. AZ (80 degree weather is here!)
Posts: 242
Thanks: 16
Thanked 12 Times in 3 Posts
Default

A few more from Ken!









Reply With Quote
  #4  
Old 08-09-2008, 03:59 AM
MarkM66's Avatar
MarkM66 MarkM66 is offline
Supporting Member
 
Join Date: Jul 2004
Location: St. Louis MO
Posts: 1,962
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Why wouldn't it go on the trailer?
Reply With Quote
  #5  
Old 08-09-2008, 07:24 AM
Ricochet's Avatar
Ricochet Ricochet is offline
Moderator
 
Join Date: Jul 2004
Location: Sacramento, Ca
Posts: 2,403
Thanks: 319
Thanked 381 Times in 121 Posts
Default

Looks killer Jody!! Glad to hear you made it up there with no problems. I see Charlie drove Red Witch. Have a blast.
Reply With Quote
  #6  
Old 08-09-2008, 10:33 AM
kovert kovert is offline
Member
 
Join Date: Oct 2007
Location: Santa Fe NM
Posts: 84
Thanks: 0
Thanked 0 Times in 0 Posts
Default

amazing car you get a 10 for that engine!!!!!
Reply With Quote
  #7  
Old 08-09-2008, 01:23 PM
class67's Avatar
class67 class67 is offline
Senior Member
 
Join Date: Aug 2007
Location: Tracy, CA.
Posts: 385
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Car looked great Jody , I saw it as I was crusing through, if only I could have found a place to park (lol) I would have looked a little closer and BS'ed with you. I got there to late in the day though, next time I guess.
__________________

Steve
67 Camaro RS

66 Chevelle (in progress)

Last edited by class67; 08-09-2008 at 01:33 PM.
Reply With Quote
  #8  
Old 08-09-2008, 02:22 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,319
Thanks: 7,098
Thanked 2,174 Times in 1,001 Posts
Default

Quote:
Originally Posted by MarkM66 View Post
Why wouldn't it go on the trailer?
ramps are kinda short which makes the angle severe; something underneath would hit the trailer when it was about half way up. Some longer boards would have probably done it, but I didn't have any at the house, and rather than screwing around just decided to drive it.

Made it back today in one piece, car ran perfect. Never broke 190 degrees even in traffic, and averaged just over 21 mpg total (16 mpg uphill to Reno and 26 on the way back). I think it will exceed 21 mpg on a flat run.

There is something going on in the rear end; sounds like a diff issue, clunking and bad noises on tight turns. I just had new gears installed in June as well as a complete re-do of the true trac diff. I'm going to take a look at it later, but it didn't quit on me and made no noise cruising down the road.


Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #9  
Old 08-09-2008, 04:03 PM
ironworks's Avatar
ironworks ironworks is offline
Senior Member
 
Join Date: Oct 2005
Location: Bakersfield, Ca
Posts: 5,156
Thanks: 4
Thanked 35 Times in 21 Posts
Default

Did you put the diff additive in the rear end? That stuff does wonders, It may sound like the diff is going to fall out of the car and you put 1-2 little tiny bottles in it and the noise is gone in like 10ft.
__________________
www.ironworksspeedandkustom.com
Reply With Quote
  #10  
Old 08-09-2008, 06:15 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,319
Thanks: 7,098
Thanked 2,174 Times in 1,001 Posts
Default

Quote:
Originally Posted by ironworks View Post
Did you put the diff additive in the rear end? That stuff does wonders, It may sound like the diff is going to fall out of the car and you put 1-2 little tiny bottles in it and the noise is gone in like 10ft.
no, running Amsoil and they said it's in there. I was thinking of putting some in anyway.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 05:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net