1000hp Sbc Vs 1000 Hp Bbc, Which One Would You Go With?

[sacarguy]

i just don't know where to begin.

first your NOT going to put a honest 1000 horsepower down on radials on the street maybee from a 50 mph roll but not 0-60

and yes i can speak from experiance since my race car ran mid sevens on radials.

yes nelson can do it easy if you want to spend a metric ton of money but there are plenty of others out there who can do the same thing for far less imo.

my radial cars motor put out 2600 horsepower and 2000 torque from a 434 cube small block ford with street style heads .. no yates heads or anything crazy and a single turbo. < 114 mm >

any engine shop can build you a 430 + cube motor with good heads and proper cam and then do a custom turbo kit with a 88 mm large frame turbo or a pair of t-67's and at 8-12 psi on pump gas you will easily hit 1k horsepower its not rocket science realy .. i build em all day like this.