Has anyone here used wilwood brakes on a second gen camaro?

[thedude327]

Originally Posted by ProdigyCustoms

The brakes mounted front and rear (nine oclock and 3 oclock) is for the staggered shocks on the factory cars. The cars with the calipers both mounted the same (nine o clock) are most likely aftermarket suspension with both shocks mounted behind the rear.

That may well be why it was mounted that way as that particular camaro did have what were either cal-trac or slide-a-link mounting plates installed on the rear axle. Hmmm, I wonder if those mounting plates move the rear shock over some to give more clearance for mounting the wilwood calipers at the rear on both sides.

[tazzz2_ca]

It's been a while since my stuff came in over at my builders shop for the 72 RS but I thought my builder said something about the kit we received becoming some kind of a "new Package or system" that they are looking to release (if they haven't already)....

I know the fronts are 13" 6 piston calipers and I think the back were 12" 4 piston calipers with e-brake incorporated into the rotors as discussed above. I'm hoping to take some project update pic's early next week and will ask my builder about the package then.