1966 GTO L92 / 6L80E / Street Challenge Project

[Grambo90]

very clean ride.... i REALLY want those gauges, where can i find them because google is telling me nothing.

[Rubes]

Originally Posted by Grambo90

very clean ride.... i REALLY want those gauges, where can i find them because google is telling me nothing.

http://www.mastmotorsports.com/page....90%20ECM&id=85
unfortunately, the way I understand it is that you have to use their ECM to drive those gauges.

[V8TV]

Here's the rear Air Ride Street Challenge suspension system and Currie 9+ rear axle housing going in... it's only the axle housing because a major shipping company (to remain nameless) "lost" 33 spline axle... Other than that, no major hiccups with the install. We chose to weld in the upper air spring brackets to make it a little cleaner.

http://v8tvshow.com/content/view/590/1/

[BBC69Camaro]

Cool update, I like the touch of tack welding that washer in the spring perch.

[V8TV]

We've going through all the build pics and posting photo galleries of the GTO build... there are over 550 photos total, which will be in 13 or so separate galleries. The first 5 sets are online, and the new ones will be publishing all week. If you didn't see the videos and are interested in this car, check them out at the link below.

http://v8tvshow.com/content/blogcategory/74/118/

[V8TV]

It's been a while, but here's another update on the GTO - the 2 tone paint process.

http://v8tvshow.com/content/view/657/118/

[V8TV]

Here's a look at the Mast Motorsports M90 ECM and their killer CAN network gauge package. We installed their M90 in our L92 GTO along with their harness and throttle pedal, then made a dash insert for the gauges. Very nice stuff.

Video:

http://www.v8tvshow.com/forum/index....6.html#msg7516

[Driven1]

Hello!

I figured I'd get on board, register and let everyone know how this car is performing.

I took it out on it's maiden voyage on the Hot Rod Power Tour last year and it made the trip just about flawless. The one thing that was an annoyance was one of the plugs in the O2 sensor hole of the header worked it's way loose, but didn't fall out so I had a weird rattle.

The car has gotten me upto 25.3 MPG and was averaging 22MPG on the tour.

It's fun to drive and I have plans to get this project continuing on to help with the mission of DRIVEN1

Thanks and look for more updates!

[V8TV]

Just posted a huge photo gallery on the GTO, something like 540 pics or so covering the build from start to finish. Or at least until we get it back to do some more mods!

http://www.v8tvshow.com/images/stori...lery/index.htm