Corvette hub kits for second gen camaros - Lateral-g Forums

Blake Foster · #1 10-23-2009, 03:12 PM

ATS Spindle is the only one i know of

Apogee · #2 10-23-2009, 04:42 PM

Thanks for the call Paul. Other than the ATS AFX spindle, the only other suggestion I could make is that you contact Art Morrison Ent or any of the other aftermarket (sub-)frame suppliers building chassis using the C5/C6 front knuckles...just depends on how serious $$$ you're looking to get.

Maybe Mr. Matt at AME will chime in on this thread when he gets the chance.

Tobin
KORE3

Cris@JCG · #3 10-25-2009, 09:51 AM

I have a 70 Camaro that I have been working on that have been waiting for more bolt on suspension parts to come out.. The dropped spindles that I have for this project is not really the route I want to go with.. I like the bearing pack/hub idea on the spindle like C5/C6.. I will see if I have a solid model of the spindle that I worked on for some custom brakes I did.. If I try to make these spindles they will be out of cast iron with some good solid mounting point for calipers.. steel or aluminum forgings is very expensive!