Introducing: The 'Y-TRY' Twin Turbo Camaro

[Y-TRY]

This long-term project is finally coming to fruition after 7 years of work and planning. Here's some specs:

Engine: MoTown block 406
Crank: Scat 4340 Ultralight Stroker (2.45" mians, 3.75" stroke)
Rods: Eagle 4340 H-Beam, 6"
Pistons: JE Inverted Dome (8.1:1)
Cam: Custom Ground Solid Roller
Heads: (Well) Ported AFR 220's
Intake: GM Bowtie
Induction: Twin PT-52 turbos, Kook's Stainless headers (thanks CamcoJB), Two HKS Standard Wastegates, HKS Super Sequential BOV, TurboXS Dual Stage Boost Controller, CarbShop prepped 750hp Blow-through

Transmission: TremecTKO, Centerforce DF Clutch, Hays billet flywheel
Driveshaft: Denny's Nitrous-Ready, Mark Williams billet steel yokes
Rear: Ford 9", Auburn Limited Slip, Richmond 3.89's
Wheels: Boyd Turbo-Tech, Front: 17x7 w/ 235/45's, Rear: 17x9.5 w/ 285/40's (FM/5's are in the plans)
Brakes: Baer Track/Touring
Suspension: Stock geometry with Hotchkis stuff, Koni shocks, PST bushings, CalTracs

...Well, you get the point. The list goes on. I did all the design and measuring while my cousin, Sean Burt of LG Motorsports, fabricated all the tubing and exhaust. It's just now running and preliminary dyno numbers are encouraging but there is still a ton of tuning to do. Once everything is dialed in it will come back apart for grinding and coating all the tubes.

I've been lurking around for a while and am also a member on Pro-Touring.com and several local Forums. I'm pleased to introduce myself and my car to you guys.