L & H Kustoms Pro Billet Spindles - Lateral-g Forums

lhkustoms · #1 12-15-2009, 09:51 PM

here are our hubs which include hubs, bearings, seals and screw in studs

and here are our billet caliper brackets for C5/C6 calipers for the front

And our rear caliper brackets to run C5/C6 brakes on GM 10/12 bolt rearends which allow you to clock your rotors to your taste 90 deg up 17.5 deg more or up to 45 deg

customcam · #2 12-15-2009, 10:24 PM

Very nice

Bryce · #3 12-16-2009, 08:21 AM

Let me know when you have a 65 mustang spindle ready. I would love to test it out for you. I have a 65 falcon with my engineering front suspension. Also I have a intermeccanica omega that i will be building a custom front suspension for. Let me know how what you think about using that as a test vehicle for you.

lhkustoms · #4 12-16-2009, 09:08 AM

Quote:

Originally Posted by 5280/4

Let me know when you have a 65 mustang spindle ready. I would love to test it out for you. I have a 65 falcon with my engineering front suspension. Also I have a intermeccanica omega that i will be building a custom front suspension for. Let me know how what you think about using that as a test vehicle for you.

I will let you know. We are finishing up our GM applications first then will finish the mustang spindles. We already have the spindles for A,F,X cars and are working on 2nd gen F body, Gbody/S10 and B-body cars which we will have ready by mid january then probably have the mustang spindles available sometime in february.

GrabberGT · #5 12-17-2009, 11:47 AM

Quote:

Originally Posted by 5280/4

Let me know when you have a 65 mustang spindle ready. I would love to test it out for you. I have a 65 falcon with my engineering front suspension. Also I have a intermeccanica omega that i will be building a custom front suspension for. Let me know how what you think about using that as a test vehicle for you.

hey no cutting in line. I was here first. J/K.... I've got a Maverick with a TCP c/o front end in need of some Mustang drop spindles. Keep me on the short list for a pair.

lhkustoms · #6 12-17-2009, 11:56 AM

Quote:

Originally Posted by GrabberGT

...... Keep me on the short list for a pair.

Will do pm me your contact info

69sponge · #7 12-17-2009, 09:51 PM

The spindles for my camaro arrived last week, and look great.Ill jump on the install after the holidays and report back then.

lhkustoms · #8 01-06-2010, 06:07 PM

L & H Kustoms & Pro Billet Components is proud to announce our new Bumpsteer corrected Pro Billet™ Steering arms for the F and X body cars. These steering arms are machined from ultra strong billet aluminum and have a 304 Stainless steel tapered tie rod insert to prevent fatigue. They have revised geometry to reduce bumpsteer to almost zero. These arms are designed after the "short" f,x body steering arms. They are a great compliment to our Pro Billet™ Tall Spindles or can be used with oem style spindles to cure the massive bumpsteer found in the original steering arms. They come standard black anodized. They Retail for $275 They are in stock ready to ship.

**WSSix** · #9 01-07-2010, 07:40 AM

Luke, can you give me more info on the rear C5 brackets for GM 10 bolts?

Will it work with the C5 parking brake?
Will it bolt right on or will extra spacers be needed or anything else be needed?
Cost?
Basically, I want C5 rear brakes complete with parking brake to compliment my C5/6 front brakes. Will this bracket allow me to do this for my 79TA?

Also, your bump steer arms, are they 1st or 2nd gen applicable?

Thanks

lhkustoms · #10 01-07-2010, 08:55 AM

Quote:

Originally Posted by WSSix

Luke, can you give me more info on the rear C5 brackets for GM 10 bolts?

Will it work with the C5 parking brake?
Will it bolt right on or will extra spacers be needed or anything else be needed?
Cost?
Basically, I want C5 rear brakes complete with parking brake to compliment my C5/6 front brakes. Will this bracket allow me to do this for my 79TA?

Also, your bump steer arms, are they 1st or 2nd gen applicable?

Thanks

Trey, Our rear brake brackets will work on your 79TA. We offer 2 different rear brackets for the 10/12 bolt. one without provision for the parking brake $125 and one with provisions to run the factory e brake assembly $150 I dont have the ebrake brackets photos posted I will post some soon. the steering arms posted are for 1st gen f body. we are in the final stages of finishing up our 2nd gen spindle and steering arms.