bodywork on my 68

[NsaneHotrodz]

I like to use featherfill on most of my cars. Polyester primers are high build, and most of them sand easy. Keep in mind that just because it says high build that doesn't mean it will fill a dent. After you prime make sure you use a guide coat to show the low and high spots. While you are sanding don't press down hard, you do not want to distort the metal while you sand.

[R0LLDAMTIDE]

thanks man, im kinda on the right track i guess. what do you use for the guide coat?

[NsaneHotrodz]

I like the 3M dry guide coat.

[GPR]

I epoxy prime first than use Slick Sand polyester primer to block it out followed by epoxy or urethane primer. I use old left over paint reduced a lot for a guide coat.