IRS help? no not the government - Page 2 - Lateral-g Forums

bob442 · #11 03-09-2010, 06:31 PM

Now.... we are talking... this is what would work great, and this is how i would build the sub frame for the rear that i dreamed up. I dont think i could find one thought, there a little more scarse than a corvette, but we'll see what i can dig up.

http://www.tazcobra.com/images/2006_...T_susp_IRS.JPG

EDIT: actually thats from a cobra 99-04, and they are very very very cheap. Jacob, I owe you a drink! i could go for this and make if fit with little effort

wellis77 · #12 03-10-2010, 01:31 AM

If you still had a desire to use Corvette stuff with a Viper diff, here's your diff. I got mine this cheap, but it was completely disassembled and now I've got to get it together. Wishing I would have waited...

http://longisland.craigslist.org/pts/1635248101.html

deuce_454 · #13 03-10-2010, 02:42 AM

Quote:

Originally Posted by bob442

Now.... we are talking... this is what would work great, and this is how i would build the sub frame for the rear that i dreamed up. I dont think i could find one thought, there a little more scarse than a corvette, but we'll see what i can dig up.

http://www.tazcobra.com/images/2006_...T_susp_IRS.JPG

EDIT: actually thats from a cobra 99-04, and they are very very very cheap. Jacob, I owe you a drink! i could go for this and make if fit with little effort

http://cgi.ebay.com/ebaymotors/MUSTA...Q5fAccessories

ebay is your friend :-)

bob442 · #14 03-10-2010, 09:59 AM

the Mustang rears are everywhere, i found a few local that i'm going to try and get for $600

mfain · #15 03-10-2010, 12:42 PM

Here's the website I think Deuce was talking about. It is a C-5 set-up with a Viper differential built to fit early Corvettes -- good construction pictures. The link was buried in a thread titled "Vette Suspension in a Nova" in the suspension threads (Feb 7th by Sartran). That thread contains a pros/cons discussion of C-4 and C-5 based suspensions.

Good luck with your project.

Pappy

http://www.streetshopinc.com/c5andc6for53-82.html

68RS350 · #16 03-11-2010, 06:51 AM

If you are still looking for a C5 Differential adapter plate to run a front mounted trans check out Hot Rod Jim and his PT-57. A majority of his builds and projects have to do with C5 and C6 Corvette stuff. He has a build thread on this board in the project section. Check it out.