Flush mounted glass what are you doing for seals ?

[prostreet69cama]

Originally Posted by finch

I will make it easy for you if you want to buy online.

http://bondsbrothers.com/products.asp?cat=68

I buy the FT2030-75 and the FT1830-75

How does this rubber fit around the corners,,does it curl up. I tried the wider rubber 3/4" and had hell around the curves. It wanted to wrinkle up and not lay flat. Do you have pictures of it installed? Did you have to "V" cut the back side to make it fit?

[Finch]

Originally Posted by prostreet69cama

How does this rubber fit around the corners,,does it curl up. I tried the wider rubber 3/4" and had hell around the curves. It wanted to wrinkle up and not lay flat. Do you have pictures of it installed? Did you have to "V" cut the back side to make it fit?

I have not had any issues with curves. Key thing is to tape the entire molding down with blue or green painters tape overnight to let everything set. On actual corners I cut the molding to make a 45.

[BritishGreen68]

i think it would look better with no seal if you can pull it off... alot of OEM cars these days dont have a seal..

here is some more info..
http://v8tvshow.com/component/option...opic,2383.255/

[prostreet69cama]

Originally Posted by BritishGreen68

i think it would look better with no seal if you can pull it off... alot of OEM cars these days dont have a seal..

here is some more info..
http://v8tvshow.com/component/option...opic,2383.255/

Yes I agree with you 100%. After doing the red 69 above I would do it different. It looks alot better like that. But we bought the glass as a 2nd thought. I would build the car body around the glass.

Is that factory glass or oversize glass?