Question for our metal fabricators!!!

[SuperB70]

GregWeld, your right on the money.
This is a handy tool if you weld some thin or damaged material.
Sure it can be duss hole close but this do it faster and most important that this draw a lot of heat away.

I also use a piece of coppertubing, 1/2" hammered the other end flat and have bendet to fit what every I do with it.

I have seen somebody to use those hold-down toggle clamps combined with a piece of copper tin for one mans working.

Again, I'm not a pro just a everyday welder how wants to get better doing it.