69 Camaro subframe channel to lower

[Track Junky]

I intend on channeling mine for phase 3 build. The nice thing about channeling is you will be able to keep suspension travel. I'm only doing 1 1/2". I'm going to raise the front radiator support mounts up, lower the mid mount, and fab for rear mount then hat channel it in. Depending on what steering set up you have you may have to customize. If your running a stock brake booster it may hit valve covers so you need to decide what your going to exchange that with and there are many options. The front fender wells will need to be cut where they meet the frame. Your hood will drop closer to your motor, LS might be OK. Your going to have to raise trans tunnel and may have to channel for exhaust system. Wait, it gets better, depending on tires, wheels, and backspace, you may have to stretch fenders and quarter panels. I want to keep my track width so thats where I'm headed. I probably left a couple of things out that have to do with firewall dropping but you get the idea.