Here is another 68 Camaro we are working on here at the shop.. It has been a drag car all its life & now are working on putting back on the street.. When the car was stripped down to bare metal we found that it had lots of rust covered with bondo & card board was used as a backing to hold it in place.. Point of no return.. Owner said fix it & while you are @ it give it some custom touches.. Replacement floors were required with trunk & firewall..
Upgrade list: Scott Mock Sub-frame with C6 suspension, Rear suspension ??, LS2 with T56, Z06 Corvette wheels, & a few JCG custom pcs...
One of main body men who happens to be good @ replacement sheet metal, front sheet metal squaring, & gaping all opening.. wanted to be given the opportunity to do some custom fabrication work.. so since we have so much of it going on right now here @ the shop.. I said.. Go for it!! He wanted a bead roller.. We bought one.. & here are the results so far.. Not bad for his first time on the bead roller!
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Texas 68 Camaro
Threaded Mode