1970 Camaro RS Operation Budget LSx

[Leadfoot1]

About your leaks. I noticed you seem to be using a mix of standard hardware store copper fittings and AN parts with the log (where you seem to be having have all your problems). I'm not sure, but arent the copper parts a 45 degree taper vs the AN stuff being 37? Would that not be a possibility that incompatibility would lead to leaks?

Just a tought, and i'm with '65 on the pics, Weeeery nice, even showed 'em to the wife to be!

Lead.

Just found this ; (Last phrase at bottom if you wanna save 4 minutes lol!!)

The AN thread is a particular type of fitting used to connect flexible hoses and rigid metal tubing that carry fluid. It is a US military-derived specification that dates back to World War Two and stems from a joint standard agreed upon by the Army and Navy, hence AN. When the Air Force became its own service in 1947 the AN designation came to reprisent Air Force and Navy. Some aftermarket automotive fitting manufacturers sometimes still mistakenly referred to it as "Army-Navy".

AN sizes range from -2 (dash two) to -32 in irregular steps, with each step equating to the OD (outside diameter) of the tubing in 1/16" increments. Therefore, a -8 AN size would be equal to 1/2" OD tube (8 x 1/16 = 1/2). However, this system does not specify the ID (inside diameter) of the tubing because the tube wall can vary in thickness. Each AN size also uses its own standard thread size.

AN fittings are a flare fitting, using 37° flared tubing to form a metal-metal seal. They are similar to other 37° flared fittings, such as JIC, which is their industrial variant. The two are interchangeable in theory, though this is typically not recommended due to the exacting specifications and demands of the aerospace industry. The differences between them relate to thread class and shape (how tight a fit the threads are), and the metals used.

Note that 37° AN and 45° SAE fittings and tooling are not interchangeable due to the different flaring angles. Mixing them can cause leakage at the flare.