It's finally out my 69 Camaro! - Page 32 - Lateral-g Forums

**syborg tt** · #**311** 06-20-2011, 09:03 PM

Quote:

Originally Posted by DOOM

ABS yes just waiting to see what Mark comes up with!! I pay no attention to Marty!!!!!!

protour73 · #**312** 06-22-2011, 06:18 AM

Mario, this thread is moving WAY to slow ..............

**DOOM** · #**313** 06-22-2011, 06:54 AM

Quote:

Originally Posted by protour73

Mario, this thread is moving WAY to slow ..............

Scott I here ya!! My problem isn't really a problem,my shop has been crazy!! I always put my buisness first.... I'm a hands on owner as you know,100 plus hours a week doesn't leave me with a whole lot of ''me time''.. This is one of the reasons why I decided to have Troy help me with some of the work load .... It'll keep moving things forward..

BBT FAB · #**314** 06-22-2011, 08:17 PM

Quote:

Originally Posted by DOOM

Scott I here ya!! My problem isn't really a problem,my shop has been crazy!! I always put my buisness first.... I'm a hands on owner as you know,100 plus hours a week doesn't leave me with a whole lot of ''me time''.. This is one of the reasons why I decided to have Troy help me with some of the work load .... It'll keep moving things forward..

I hear that Mario.... I am on year 6 on my personal project due to lack of time.....unfortunatley its not nearly as cool as yours!!

**DOOM** · #**315** 06-23-2011, 06:57 AM

Quote:

Originally Posted by BBT FAB

I hear that Mario.... I am on year 6 on my personal project due to lack of time.....unfortunatley its not nearly as cool as yours!!

And now I'm going to put your project behind a little more.......

I'll be talking to today have a few questions.....

Rick D · #**316** 08-06-2011, 06:08 AM

Bueller Bueller Bueller???????

**DOOM** · #**317** 08-06-2011, 07:39 AM

Quote:

Originally Posted by badrs69

Bueller Bueller Bueller???????

Rick ..... Progress is painfully slow. Mike Kelly and I are slowly getting things done though.. The last quater panel gets glued and resistence welded tomorrow and that will complete the quarter install. It seems like it took forever to get these quarter panels on,we must of had them on and off the car at least 30 times each side! Things will go a little faster now that this is done, I hope..

The car was to be at BBT at the end of July but that obviously didn't happen. Plus a part issue also help delay that. You have no idea how much Im looking forward to getting it to Troy. The more I think about it the more I think its the right decision.I'm still at a 100 hour work week,shop has been crazy busy and I couldn't be happier!! As I said before my shop comes first, toys last. You need to make the money to pay for the toys.

I'll have some update pictures very soon....

Rick D · #**318** 08-06-2011, 08:13 AM

Mario, what qtr's did you end up using?? Also do you have any pictures of the trunk floor set up from MCC that you had made, top and bottom??

rwhite692 · #**319** 08-06-2011, 10:32 AM

Quote:

Originally Posted by DOOM

Little update... When the car goes to BBT it has to be a roller so my nephew started to put the suspension together this weekend. I could'nt resist putting the rotors and calipers on to see how they look ! These things are HUGE!!

All the panels are fitted and ready to weld, I'll start this week. It leaves at the end of July for the detail work..

Looks great Mario! (though I must advise you that "little update" is my registered trademark, LOL!)

**Rybar** · #**320** 08-06-2011, 12:06 PM

Mario, sorry I haven't posted in the thread before bit the project is looking real good and smart move taking to BBT they do awesome work. Concentrate on your shop making money is a good move.