New tune for the DC/Kalis camaro. New dyno graphs.

[phillym5]

I sent the Camaro back to Shadowman http://www.discovery-automotive.com/portal/

He and Tony from Florida (Big time tuner) were tuning a couple Ford Gt's.. and Tony was actually going to remote tune my car from afar.. but since he was flying into Shadowmans place... i shipped the car up for a couple days.

Well.... the new numbers are on 91 octane. The boost level on the wastegates (lowest power level) was 8lbs(7.8) to be excact.
the last pull was at 11lbs of boost on 91 octane as well. That is the "mid level" boost.
If i want to throw some race gas in there.. i can bump it up a couple more pounds.. but will ultimately need bigger injectors. I told the guys..."nah.. lol.. thats plenty of power!!"
845rwhp at 8 lbs
901rwhp at 11lbs
Here are the new graphs....

[Flash68]

Dude, that's just a monster... flat out!

What were the previous numbers?

And it looks like they shut down the pull well before 6k rpm on that final graph?

[phillym5]

Originally Posted by Flash68

Dude, that's just a monster... flat out!

What were the previous numbers?

And it looks like they shut down the pull well before 6k rpm on that final graph?

The previous number was 760rwhp. The tune had just never "really" been dialed in. It was the "get to Sema" tune...haha. It had been almost two years.

Im waiting to get the rest of the graphs.. thats all i got for now. There is some video coming too.

[Steve1968LS2]

Only 900 rwhp????





Yea, that should be enough.. I can't hook my car, I can only imagine another 300 hp!

[rwhite692]

Very nice! What lb/hr size are the injectors that you are currently using?

[Rybar]

Wow Josh, those are some insane numbers. What are your motor specs again??

[Matt@BOS]

On race gas I'm pretty sure your engine would lose more power through the drivetrain than my Mustang has

[tones2SS]

Man, that thing must be a beast! Very nice.

[phillym5]

rwhite....
Im running 80lb injectors

Rybar...
Its the 4 bolt LQ9 block with Dart Pro 1 heads, Scat rods, Arias Pistons, Eagle crank, mild cam, Fast xfi 92 mill throttle body, and twin Bullsey Power 66 mill turbos with custom hot side.

Steve..
I run above 60mph... those cone courses you run... i have a skateboard for those!!

Matt..
Maybe... Maybe not. She still hooks good in 4th.. 3rd can be peddled real nice.. and she still stays straight.

Thanks for the compliments guys!!
I'll get some new video's up for you soon.

[GregWeld]

Just huge! Wow what an improvement!

That's better than the stock market!