69 pro touring Yenko

[dead sailor]

Car looks absolutely amazing! Where did you get that billet bracket to bolt the master up to the firewall?

[69x22]

Originally Posted by NvrDun71

Car turned out killer Tony, was good seeing ya at the show

Thanks Jess, love the pictures. Hope that bachelor party went well.

Originally Posted by 6D9 Matt

Why do you say that (about the rear)? What do you not like about the G-bar rear? Asking bc I plan on going with a built rear and 4-link after Xmas.

A few of members with some decent horsepower and allot of racing are getting some cracks in the rear frame rails from the upper control arms pulling on the cradle. See Vegas 69 thread. When I got back from this trip I found them on mine. If you do run this set up you need to either replace the frame rails or seriously beef them up. Or just go with DSE.

Originally Posted by dead sailor

Car looks absolutely amazing! Where did you get that billet bracket to bolt the master up to the firewall?

Thanks, that comes with the hydraboost kit.

[Rybar]

Originally Posted by 69x22

A few of members with some decent horsepower and allot of racing are getting some cracks in the rear frame rails from the upper control arms pulling on the cradle. See Vegas 69 thread. When I got back from this trip I found them on mine. If you do run this set up you need to either replace the frame rails or seriously beef them up. Or just go with DSE.

Thanks for reminding me to check my frame rails...

Your car looks absolutely killer. We need more pics and open track video to hear that thing sing

[DOOM]

Tony absolutely awsome!!!!!!! Perfect all the way around...

[dead sailor]

Originally Posted by 69x22

Thanks, that comes with the hydraboost kit.

Ohh, i just looked at it quick i thought that it was a manual set up. Nevermind then, thank you though.

[69x22]

Originally Posted by Rybar

Thanks for reminding me to check my frame rails...

Your car looks absolutely killer. We need more pics and open track video to hear that thing sing

Thanks. I will have to work on the open track video. I do plan on running it down the quarter mile soon with some good tires on the back.

Originally Posted by dead sailor

Ohh, i just looked at it quick i thought that it was a manual set up. Nevermind then, thank you though.

Cool!

Originally Posted by DOOM

Tony absolutely awsome!!!!!!! Perfect all the way around...

Thanks Bro!

[Stilo]

nice 69 camaro love the over all look

[69x22]

I thought I would share this with you forced induction guys.
When I was in the building stage of this car I took a short cut and went with a cheap ebay intercooler. While trouble shooting on why the car was down on power I discovered there was a 15psi DP across the intercooler due to the air flowing across a long narrow path of core creating the high DP. Bell designed me a intercooler that would allow the air to flow across a wide short core, which lowered the DP across the intercooler and allowed the car to put 835 HP to the tires a 125HP gain by swapping intercoolers. The ebay intercooler was a nice piece for the money it just wasn't a good design for what I had in mind. I hope this makes sense and keeps someone from making the same mistake I made.

[69x22]

In order to keep oil mist from entering the combustion chamber and causing detonation I decided to install a new evac system. I went with 2 of the new re-designed Moroso breather tanks. The tanks now have an internal baffle with a stainless mesh to help separate the oil. I ran a -12 line from each valve cover to a individual tank. I hope the pictures are not to dark.

[6D9 Matt]

Originally Posted by 69x22

A few of members with some decent horsepower and allot of racing are getting some cracks in the rear frame rails from the upper control arms pulling on the cradle. See Vegas 69 thread. When I got back from this trip I found them on mine. If you do run this set up you need to either replace the frame rails or seriously beef them up. Or just go with DSE.

Wow hadnt heard about this issue... thanks for the heads up.