Chasing the Ghosts of LeMans - Thunder - Project 487 Super Snake

[Ripped]

Originally Posted by Flash68

Now that is hilarious right there. (Sorry Doug )

I am laughing too, what else can you do? I just wonder what part of my body, I'm going to f-up next

---
Porting work so far;

Intake is pretty much done, unless I change the shape of the ports on the head.



The last thing, I am going to do is hit the ports with a coarse file, to texture them a little.

Heads;

I started with an exhaust port, because it's smaller, and a little more forgiving, if I F-it up. I have a pretty good understanding of aerodynamics and hydrodynamics, so used that in shaping the exhaust port, and bowl.

I took into consideration, the shape of the header opening, and raised the port slightly. Next I ovaled the port slightly, again to match the header port, since they are a little taller than the heads.

The bowl is quite a bit deeper on the exit side of the port.



(Head is upside down, in pic below) I didn't do much with the short radius, other than a slight polish. I did turn down the port exit, into the header, as the header pipes all turn down



Once I'm done, the exhaust will get a nice polish, then I can replicate on the other 7 exhaust ports