1969 Torino

[6D9]

Looks bitchin!

[Roadster Shop]

A few pics from the end of the day.





Rob is still working out the ideas for the inner fenders and possibly down bars from the firewall to the frame. The shock towers and most of the inner fender will definitely go. We just left it in for strength during transportation.



Pretty good shot of the frame rail to pinchweld difference. Not too bad considering it was a unibody car and we were able to get a 3.5" - 4" frame rail in place.

[Ron in SoCal]

Phil cut those shock towers out! You can board it up w 2x4s for transport

Nice job Sir!

[Roadster Shop]

Originally Posted by Ron in SoCal

Phil cut those shock towers out! You can board it up w 2x4s for transport

Nice job Sir!

We would have to use marine grade wood for this vessel, and that stuff gets expensive!

[Rick D]

Originally Posted by Ron in SoCal

Phil cut those shock towers out! You can board it up w 2x4s for transport

Nice job Sir!

Originally Posted by Roadster Shop

We would have to use marine grade wood for this vessel, and that stuff gets expensive!

Man Rob these guys just don't let up! So when does the SS Minnow set sail back to Cali??

[Rick D]

On a more serious note, car looks frickin Awesome!!!
I bet you can't wait to get it home and sit in the driver seat and make rum rum noises.

[GregWeld]

I have some great ideas for hydraulic bow and stern thrusters driven off the dry sump pump.... should help in an oversteer situation... understeer, not so much.


Nice job Phil and crew!


My bet is - when this bad boy gets finished and is sitting somewhere - it draws three times the crowd Danica gets.

[67zo6Camaro]

Originally Posted by Roadster Shop

RS nice work.

Rob I have dibs on the temp rolling stock.

[67zo6Camaro]

I have been inspired by all the talk about Ford racing history and the features of this build that I bought you a coming home present.

[Vegas69]

It's like fake tits on a fat chick.