Scott Mock/vrp New 2013 Sub Frame Design

[coolwelder62]

Originally Posted by bret

Scott...nice front suspension...it's got all the right stuff...very proud to be associated with your efforts with our shocks...go, go, go!

Thank's Bret.The ride tech shock's are work's of art that work as well as they Look.

[coolwelder62]

Well,I have some great News.I just sold my first C-6 sub frame (#53) over sea's.It's going down under to Australia.It will be a weld in clip for a Elcamino.I will post some photo's as it start's going to gather.

[fleetus macmullitz]

Originally Posted by coolwelder62

Well,I have some great News.I just sold my first C-6 sub frame (#53) over sea's.It's going down under to Australia.

Congrats Scott.

The legend grows continentally.

[WSSix]

Congrats on the success!

[Jr]

Originally Posted by coolwelder62

The std. unit's will already allow a 18x11 wheel w/315 tire. I am working on a narrow unit that will allow a 18x12 wheel w/335 tire W/O any fender widening.The narrow unit requires alot of header work and steering shaft fitment to work with the narrow frame rails.Call me if you have more Questions.

I assume this is on a 69 Camaro. Have you tested the fitment on a 67 with 315?

[coolwelder62]

Originally Posted by DJW32

I assume this is on a 69 Camaro. Have you tested the fitment on a 67 with 315?

I would think an 18x11 would work on a 67 camaro.Would need check fiment once installed.I did a 1968 camaro for myself a few years back.It had 18x11's w/315 PS2' rolled the fender lip some.

[Bmf5150]

Great looking frame,couple questions ..with those holes in it, will u get water and moisture in frame rails??also is this new frame the same price point as the art morrison frame???only reason I ask is cause I thought was more budget friendly??

[coolwelder62]

Originally Posted by Bmf5150

Great looking frame,couple questions ..with those holes in it, will u get water and moisture in frame rails??also is this new frame the same price point as the art morrison frame???only reason I ask is cause I thought was more budget friendly??

If a person choose's to have the dimpled holes added you could get moisture inside.We had Kevin's powder coated w/a primer first then powdercoated satin black over the primer.I don't know about AME pricing.Our frame's Pricing include's a heat treated chromoly Splined sway bar,Ajustable upper coil over shock mount(For ride height adjustments),And made in America RideTech Coil over shock's and truck freight shipping.I believe we have proved that the VRP sub frame work's as well or Better as the top after market sub frame's.I still offer the 1st. design sub frame W/O any shocks,C-6 componet's,& Rack at a very budget friendly pricing.1st design bare stage 1 sub is $3450.00,pick up some used c-6 on ebay $350.00,used rack $50.00,China made coil overs $350.00-$400.00 now you are into a complete sub frame for about $ 4200.00 Thats pretty budget friendly. Thank you Scott.

[Bmf5150]

Scott,I think your product is fantastic and you have real racing data to bsck it up..I hope I didn't come across in a bad way, I was just surprised it was priced about the same as the art morrison setup..so you can get the new setup with the holes??

[Bmf5150]

I meant without the holes?