Two Dyno days one winner

[Flash68]

Ok bitter beer face....

Originally Posted by FETorino

I was under the impression we were building motors to compete in the 3500 -7000 rpm range.

We did. But professional engine builders don't let customers run the dyno.... in their basement..... with the gimp tied up around the corner.

So you know I didn't get a 3500 and up dyno run. So the closest I got is 3900 to 7000. Post up your average torque in that range since the HP war is a lost cause.

Avg torque 3900 to 7000 = 595.9

(range on the sheet is 3900 to 6500 so I had to manually calc it)