ok,, i have now wound up the rear calipers so my emergency brake now works.. I have re bled the system ,,no air in lines that is visible and my brake pedal bottoms out on carpet still. very little resistence.. I have bench bled the master several times and was confident it was done correctly.. I will try one more time ..I can pump them up a bit but even at that the car will not stop under braking. It has to be in the master ? air or could the piston stroke be dodgy? Wilwood lists 1.10 inches .. so how much is sufficient ?- Note -- this camaro has been converted to RHD in Australia and the pedal box is foreign to the car.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
