icemanrd19 67 camaro

[randy]

Originally Posted by manelasj

Randy, Great Build! I have the same project going on. Can you tell me more about the header fitment? I have the DSE front subframe, the DSE engine mounts to locate in the stock position. Did you have to modify anything to get those headers to fit? Until I saw your build I didn't find any headers that worked for this combo. Which mounts did you use? Thanks for the help.

John

let me pull out my ticket for the headers so i have all the part numbers. Nothing had to be modified. They fit great. I think they are the best headers for the money. I would have liked to have the dse ones because they are meant for the car and fit the best buy couldnt justify the cost right now. Headers hang maybe a inch below the subframe.


DSE header fitment ( not my car )

[randy]

need some help.

So i have the passanger side windows to my liking. The problem is the drivers side wing window. I think it sits alittle too low. There is a screw on the inside of the door, bolt on the top right, and bolt on the side if you are looking at it. Now i can take the screw out and pull the window up and tighten the bolts to where i like it but i cant get the screw back in. So i tried the opposite first. Install the screw and then pull the window up. Problem is i cant seem to get enough adjustment this way like i did with the screw out.

Does anyone have a picture or a idea what this screw actually does? I can start the screw but it doesnt seem to go in the correct path. Any help would be great