Holley LS oil pan

[67Rally]

Originally Posted by cwylie

Sorry yes I am looking to use it on a first gen. I already have the old style holley pan and I am using a stock subframe. Has anyone done this? What mounts did they use. I keep finding conflicting information.

I have a '67 Camaro, stock subframe, LQ9 swap.

I used the older Holley pan with Energy Suspension 3-1117G motor mounts and Dirty Dingo sliders. My frame mounts are #3945507 and #3945508 (high performance tall & narrow '69 302/350 mounts).

The pan would have rested on the subframe without the reinforcing plate that comes with the ES mounts. They act like a spacer and the extra 1/4" was just enough. The DD sliders let you move the engine forward or back a couple of inches.

You need to match you engine mounts to the style of frame mounts you have (tall and narrow, or short and wide).

[OBeer-WAN-Kenobi]

What year first gen? Because the stands and mounts can be different. On my '69 Camaro for instance, I found that the 302/350 stands are lower than the 327 stands. Because of this, there are two different motor mounts. short ones for the 327 stands and taller ones for the big block and 302/350 stands. I have the newer 302-2 pan and even it hit the xmember when I used the mounts for a 327. I had to go to the narrower, taller mounts for the big block because all the autoparts stores have the wrong number crossreferenced for the 302/350.

[kainedogg]

What is the part number for the new Holley pan?

[Che70velle]

http://holley.com/302-2.