This is MY 67 Camaro

[Sonar Chief]

Originally Posted by jlwdvm

The bolt-on perches are offset to the center on each side...that is where you get the 1" extra clearance on each side. They are offset to the center just like both ends of the bar are offset to the center. I have the bolt-on bar mounts on my 69 firebird. I also spent a lot of time squaring up the front and rear wheel mounting surfaces, adjusting the front sub frame, moving the rear side-to-side, etc prior to welding on my upper perches....probably too much time!


http://www.pro-touring.com/threads/1...ar-build/page4

All the measuring fun started at #75

Joe .... that's a nice Firebird, I had to go back and look at some of the pixs I took of the 4 bar and see the offset of the lower brackets ... duhhhh! I had them on the wrong sides (my bad!), oh well, I think the weld on brackets look cleaner! Hey, its only metal!

I will take your Firebird posts for reference to getting all things square Front2Back, wish I had a lift thou!!!!


Rod ... thanks for the clarification, don't want to be doing this twice