GM Clutch Actuators

[spode]

I have one can't get measurements at this time. Here a thread on the corvette forum that shows the compressed and extended lengths.

http://www.corvetteforum.com/forums/...5-preload.html
Jeff

[badazz81z28]

Originally Posted by spode

I have one can't get measurements at this time. Here a thread on the corvette forum that shows the compressed and extended lengths.

http://www.corvetteforum.com/forums/...5-preload.html
Jeff

Thanks for the link. The exact reason why I need the measurements. That guy must not have measured for the two bearings he destroyed. He should have had a hard time bolting them together. That bearing was smooshed in there

[dontlifttoshift]

Posted for reference

24264182 - 98-02 LS1 F Body Slave Cylinder

Extended 3.470"
Compressed 2.890" approximately

Supposedly the Shelby GT500 unit has more travel in it, or a shorter compressed height. There are a handful of guys running them with T56s and Centerforce Dyads.

[badazz81z28]

Originally Posted by dontlifttoshift

Posted for reference

24264182 - 98-02 LS1 F Body Slave Cylinder

Extended 3.470"
Compressed 2.890" approximately

Supposedly the Shelby GT500 unit has more travel in it, or a shorter compressed height. There are a handful of guys running them with T56s and Centerforce Dyads.

Interesting. Do you have the part # by chance?

[dontlifttoshift]

Let me look

Originally Posted by dontlifttoshift

24264182 - 98-02 LS1 F Body Slave Cylinder

[badazz81z28]

Originally Posted by dontlifttoshift

Let me look

The GT500 slave....

[dontlifttoshift]

You should be more pacific....It may have been posted in Stielows build thread, I don't have it.

[badazz81z28]

Originally Posted by dontlifttoshift

You should be more pacific....It may have been posted in Stielows build thread, I don't have it.

Ill send him a note. I did see it in his build thread, but no part #.