Ricks new stamped tank VS Tanks inc new mini tubbed version

[tigerhays]

well looks like I have found my new tank!

[SlowProgress]

I just sent in my paperwork yesterday. I will post up some photos when it arrives.

[Vega$69]

I have used Tanks Inc EFI set ups in several 1st Gens and they have all been trouble free. The last one was with my built LS7 approx 650 HP

I just received the clipped corner 69 Tank for my new car. Car has DSE Quadralink, mini tubbed and the LS3/525 HP crate motor going in.

The quality of the powder coated tank is great.

Tanks had a vent issue with their 1st Gen tanks that when the tank was full it could vent fuel as pressure in the tank increased. We solved the problem by adding a vent at the top of the filler neck.

Tanks new design has resolved this issue by adding a vent port in the recessed area of the tank.

IMHO getting a show quality Tank that holds approx 18 gals with pump (Walbro which is a good quiet pump) straps, and sending unit for about $600 shipped to your door is a no brainer.

fyi - this tank will not fit cars with relocated leaf springs.

[tigerhays]

How long after you order it is its ETA

[Vega$69]

Originally Posted by tigerhays

How long after you order it is its ETA

got it 3 days after order was placed.

My buddy also bought one a couple days after I did and got his in a couple days too.

[Mr.VENGEANCE]

I just put a Tanks efi tank in Stormy and I for one love it.. and SUPER good pricing..

[paulk68]

Originally Posted by Vega$69

I have used Tanks Inc EFI set ups in several 1st Gens and they have all been trouble free. The last one was with my built LS7 approx 650 HP

I just received the clipped corner 69 Tank for my new car. Car has DSE Quadralink, mini tubbed and the LS3/525 HP crate motor going in.

The quality of the powder coated tank is great.

Tanks had a vent issue with their 1st Gen tanks that when the tank was full it could vent fuel as pressure in the tank increased. We solved the problem by adding a vent at the top of the filler neck.

Tanks new design has resolved this issue by adding a vent port in the recessed area of the tank.

IMHO getting a show quality Tank that holds approx 18 gals with pump (Walbro which is a good quiet pump) straps, and sending unit for about $600 shipped to your door is a no brainer.

fyi - this tank will not fit cars with relocated leaf springs.

So good to hear, can I ask what size pump you went with for the ls3 525?

[Schwartz Perf]

Originally Posted by paulk68

So good to hear, can I ask what size pump you went with for the ls3 525?

Not to hi-jack too bad but he went with the 255lph walbro.

We've sold a couple more beyond what Vegas John & his friend bought from us, everyone is very happy with them.
We have installed several of the non-clipped EFI tanks and there's not much more you can ask for especially for the price of them. Not downing Rick's at all, as their products are also top notch.

-Dale

[Vega$69]

Originally Posted by paulk68

So good to hear, can I ask what size pump you went with for the ls3 525?

255

I ran a 255 in my LS7 car and it performed perfectly.

If I was running over 500 hp and hard tracking I would consider the 400

[CE69]

Looks like a great tank for the price. How do they look when installed? Pic's? Being that they are 1" deeper than stock, do they hang down lower than say a DSE or Vapor Works tanks? Put a lot of money and time making it look nice underneath, don't want to only see a gas tank when looking from behind.