Wegner LS3 TVS2300 900hp

[Musclerodz]

Originally Posted by Penny

How many pounds of boost?

Whats the duty cycle on the injectors?

14 psi. I don't have any specs on the injectors.

[DFRESH]

Originally Posted by Musclerodz

14 psi. I don't have any specs on the injectors.

Mike, it looks like it has stock head bolts in the pic. I have a guy that is interested---but before I send him your way, just want to confirm that the parts list that says ARP Head/Main studs is correct. Perhaps this is an old pic. Please let me know---thank bro.

Doug

[Musclerodz]

Originally Posted by DFRESH

Mike, it looks like it has stock head bolts in the pic. I have a guy that is interested---but before I send him your way, just want to confirm that the parts list that says ARP Head/Main studs is correct. Perhaps this is an old pic. Please let me know---thank bro.

Doug

Yes it does have the ARP bolts installed. I just double checked.

[Musclerodz]

Engine is out of the car, still needs a final cleaning. There is a few spots on a couple pulleys where the anodizing is bad. I will have those parts re-anodized before shipping engine to its new owner. Price dropped to $18k shipped.

[Vince@Meanstreets]

what electronics did you run on this Mike? I assume its set up with 58?

[Musclerodz]

Yes it is 58x. Wegner had their own setup for the dyno and don't remember what they used, so no harness or computer has been purchased for it yet.

[Vince@Meanstreets]

Originally Posted by Musclerodz

Yes it is 58x. Wegner had their own setup for the dyno and don't remember what they used, so no harness or computer has been purchased for it yet.

Thanks Mike, Most likely the Holley set up.

When was the last time it was run and is that mud I see on the pan? Did it get stored outside at any point? I know its pretty humid in your area. Just worried about corrosion on the cylinder walls.