...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Project Updates
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 11-22-2015, 12:25 PM
GregWeld's Avatar
GregWeld GregWeld is offline
Lateral-g Supporting Member
 
Join Date: Jul 2005
Location: Scottsdale, AriDzona
Posts: 20,741
Thanks: 504
Thanked 1,079 Times in 387 Posts
Default

Just FYI --- On a tri-five chevy -- it's far easier to just pull the front sheetmetal off as a unit --- I tape a couple layers of green tape on the leading edge of the doors and the rear of the fenders and the edge of the cowl -- pull the hood -- There's one bolt (and some shims) at the top of each fender by the cowl -- and one at the bottom (and some shims) just ahead of the door..... two bolts (and some shims) at the core support -- three guys and walk it off.


I usually bolt them to those cheap ass furniture dollies you get at Harbor Freight and a 4 X 8 Sheet of plywood... cover it for protection and push it out of the way.


SO much easier then to access everything else.



















Last edited by GregWeld; 11-22-2015 at 12:53 PM.
Reply With Quote
  #2  
Old 11-22-2015, 12:58 PM
kwhizz's Avatar
kwhizz kwhizz is offline
Lateral-g Supporting Member
 
Join Date: Nov 2005
Location: Kenosha , wi
Posts: 1,137
Thanks: 745
Thanked 438 Times in 164 Posts
Default

Quote:
Originally Posted by GregWeld View Post
Just FYI --- On a tri-five chevy -- it's far easier to just pull the front sheetmetal off as a unit --- I tape a couple layers of green tape on the leading edge of the doors and the rear of the fenders and the edge of the cowl -- pull the hood -- There's one bolt (and some shims) at the top of each fender by the cowl -- and one at the bottom (and some shims) just ahead of the door..... two bolts (and some shims) at the core support -- three guys and walk it off.


I usually bolt them to those cheap ass furniture dollies you get at Harbor Freight and a 4 X 8 Sheet of plywood... cover it for protection and push it out of the way.


SO much easier then to access everything else.

























Thanks.........I was wondering about the easiest way to do this.......


Ken
Reply With Quote
  #3  
Old 11-22-2015, 02:04 PM
kwhizz's Avatar
kwhizz kwhizz is offline
Lateral-g Supporting Member
 
Join Date: Nov 2005
Location: Kenosha , wi
Posts: 1,137
Thanks: 745
Thanked 438 Times in 164 Posts
Default

I also received my new Wonder Bar Radio.......AM/FM Stereo /Sirius/Bluetooth...........Modern stuff to keep up with the drivetrain......LOL









But.......This car just amazes me.....can't wait to get the "Old" drivetrain and clean this old "Beater" up..........Just happened to spray some cleaner on the frame and wipe it off.............."WOWZA".........Look at this.......


Reply With Quote
  #4  
Old 11-24-2015, 12:19 PM
E.rodz's Avatar
E.rodz E.rodz is offline
Senior Member
 
Join Date: Sep 2008
Location: st. paul mn.
Posts: 649
Thanks: 0
Thanked 4 Times in 4 Posts
Default

love Nomads! also love it when someone is not afraid to cut one up! lol.that transmission cooler was doing nothing! keep up the good work ! i will be following this build for sure.!
__________________
my name is Eric Hokenson I have a dream of building ten of the coolest hot rods out of my home shop wish me luck I am going to need it! - more pics on my web site www.erodzcustoms.com this is just for fun and i am NOT looking for any more work!
Thank you supporting sponsors! without you guys there is no way I could do this myself !
Modern automotive performance,Ring bros.,Yank convertors,extreme drive systems,Cj tunes,race coatings stainless works,Modern Automotive Performance.all of these shops have the experience to get your car to the top.
Reply With Quote
  #5  
Old 01-16-2016, 06:44 AM
Boss 5.0's Avatar
Boss 5.0 Boss 5.0 is offline
Senior Member
 
Join Date: Sep 2010
Location: Connecticut
Posts: 406
Thanks: 16
Thanked 19 Times in 10 Posts
Default

Quote:
Originally Posted by kwhizz View Post
I also received my new Wonder Bar Radio.......AM/FM Stereo /Sirius/Bluetooth...........Modern stuff to keep up with the drivetrain......LOL









But.......This car just amazes me.....can't wait to get the "Old" drivetrain and clean this old "Beater" up..........Just happened to spray some cleaner on the frame and wipe it off.............."WOWZA".........Look at this.......



Really looking forward to feedback on this stereo. The Auto Sound one in my 55 Chevy is a piece of crap.
__________________
Copper Hill Rod & Custom

1955 Chevy BelAir
1951 Chevy 3100
1987 Chevy R10

Glenn
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:54 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net