Stainless fittings?

[MtotheIKEo]

Originally Posted by will69camaro

Can you find me a Tee that's 1/8" NPT male to two 1/8" NPT female in stainless? All i can find is NOS brass one. Need it for oil feed for turbo/sensor placement on my new Mast pan...

This is the brass fitting i want in stainless...

http://www.summitracing.com/parts/nos-16775nos

William

Does it have to be that configuration? Parker sells stainless fittings of all kinds.
https://www.grainger.com/product/PAR...Code=P2IDP2PCP

[69hugger]

Originally Posted by will69camaro

Can you find me a Tee that's 1/8" NPT male to two 1/8" NPT female in stainless? All i can find is NOS brass one. Need it for oil feed for turbo/sensor placement on my new Mast pan...

This is the brass fitting i want in stainless...

http://www.summitracing.com/parts/nos-16775nos

William

Easy peasy!

http://www.stainlesssteelfittings.co..._p/ss-5602.htm

(Check out the price of the large ones)

Like I said, I found everything damn fitting on earth EXCEPT the inverted flare I need!

Bill

[will69camaro]

Excellent, exactly what I was looking for. Needs to be that configuration cause there is no room above for the tee to be facing the opposite way.

William

[andrewb70]

Wilwood sells a prop valve that has 3/8" inverted flare holes so you don't need those ridiculous NPT adapters.

Andrew

[dontlifttoshift]

Wilwood part number 260-10922

[69hugger]

Originally Posted by andrewb70

Wilwood sells a prop valve that has 3/8" inverted flare holes so you don't need those ridiculous NPT adapters.

Andrew

Thanks Andrew & Donny! I never thought of that. I bet that is no more 'pensive than a couple of the unobtanium adapters I'm after.

Looks like I will soon have a couple of Baer prop valves available.

Thanks again guys!


Bill