Starter spinning when key turned to ignition location?

[jlwdvm]

Originally Posted by 71RS/SS396

I purposely posted this pic upside down since this is how the switch pins will look when mounted on the column and viewed from the passenger side of the column. The white connector shell only has 4 wires, if you place the wires in the shell as marked in the pic you should be good to go. AAW shows a non-tilt switch in their diagrams so the wires are upside down and 180* out from a tilt column switch.

BINGO! I'll check when I get home today, but I can already tell you that I currently have the pink and purple wires switched.