2nd Gen parking brake alternative

[jonathonar89]

Originally Posted by badazz81z28

I run the cables between the floor and the exhaust

Your exhaust must hang very low. I'd be interested to see pictures.

[woody80z28]

I'm using a 4th-gen console, so I ran the cables down the center of the tunnel to from the handbrake and split at the rear. Used a Lokar kit, works great.

[Sandro's 1969 502 Camaro]

I used the Lokar cables as well. I got the idea off the DSE site. Mine are routed through the inside of the car and out the back to the brake calipers.

[cpd004]

I'll take a look at DSE's site. I've only seen one where they were run inside the car. I didn't like how they exited the interior next to the bottom of the wheel tubs on either side. The guy just drilled about a 1/2" hole and passed them through.

[Doug1]

I saved these from the DSE site for my own info.