70 Chevelle performance project

[Che70velle]

SUP guys! Been a while since I’ve posted here. Car is great, but didn’t have a ton of time to enjoy it this year due to work. I’ve had an engine project going since January, and it’s finally in the car. Not started yet, but we’re close. Nothing wrong with the engine in the car at all, I simply turned stupid and decided that the car deserved an LS7. So I began putting together a plan. I’m not one to ever settle with what’s available, and I wanted to put something together a little bigger, and a little more powerful than what comes in a crate. I thought that 434 cubic inches would work well as a package, so I bought a block and sent it out to Steve at Race Engine Development (RED) in Oceanside Ca. to be sleeved. I also made a phone call to Tony Mamo to see what he could do to a set of GM LS7 heads that I had, to make them work better, and that’s where the project took a slight turn. Tony’s LS7 Head program uses TrickFlow 260 cc castings, and make big power. Tony sold me lots of goodies besides his LS7 265 cylinder heads, such as his ported MSD Atomic manifold, a Nick Williams 102 throttle body, state of the art solid roller lifters, solid camshaft, shaft rockers, ported oil pump, push rods, custom head gaskets, and more. There are a lot of details in this new engine that you have to check out, and I’ve put together a build thread over on LS1Tech. I’ll update this with pics after install is complete. Anyway, here’s a link if your interested...
https://ls1tech.com/forums/generatio...ved-block.html