Aftermarket C6 Front Suspension components

[aany001]

Jon can the rotor flanges be removed to run a factory C6 rotor?

[Jtomas801]

Originally Posted by aany001

Jon can the rotor flanges be removed to run a factory C6 rotor?

Yes the rotor adapter can be removed and/or be replaced with another adapter for other rotor bolt patterns. I believe it can be but, it would not be simple. It would add track width to each side, the wheel studs would be short and you would need to shim the caliper to match the rotor. I will pm you a link with some info on it. It would probably be cheaper/easier if you went to a two piece rotor with the correct rotor adapter.

Thanks,
Jon

[Jtomas801]

The C6 uprights, AGR steering rack and the speedway engineering sway bar have been sold.

Thanks,
Jon